I never cease to be amazed by how different I feel when it’s sunny and pleasant out versus rainy or even just grey and damp. I knew this when I bought the property, of course, which is why buying property in what is supposed to be one of the sunniest and driest climates in Canada was important to me. We had a great 2013 summer and I was busy and super active, but it was all grey and rain last year and my activity level really dropped.

This summer is starting off shakily, with the odd beautiful day cut by a stretch of grey. I have been feeling utterly bla the last four or five days and thought I was coming down with a cold. But it started to clear up yesterday and it has been absolutely marvelous today. Guess what? I’m running on about six hours of sleep, absolutely all I needed and being incredibly productive!

I thought I had about 11 hours of work to do today, but it wound up being one of those files with a lot of dead air that goes very fast, so it’s going to come in at about only 6.5 hours worth of work. I started around 7:00 and then took a long break to work on my roof.

There are no pictures of the roof repair because, frankly, I don’t need anyone going YEESH. 🙂 I used a hair dryer to soften the Eternabond and it came right up.

(For the curious, I plugged an extension cord into an outlet in the kitchen, threw the cord out a window, and then threw the cord up onto the roof! I carried the hair dryer and supplies in a bag slung over my shoulder.)

I then scraped off all the Dicor and then washed with rubbing alcohol, which brought everything up. I’ve tried mineral spirits and acetone and the alcohol did the best job, even though it’s not something I’ve seen recommended for this type of project. Hmm. It really was impressive. I had little bits of Dicor that refused to come up and I just had to sprinkle them with rubbing alcohol to get them to peel off cleanly!

For the repair, I used Rust-Oleum Leak Seal in clear. I had a choice of black, grey, or clear and wish I had gone with the grey so that I could see if I missed any spots. This is a very easy product to use, similar to spray paint, and there is no mess. I applied, as directed, a fine initial layer along the entire seam, then I climbed down to have lunch.

When I came back onto the roof about an hour later, the rubber coating seemed to have seeped into the grooves and cracks of the seam, a good thing! I applied a second thicker coat (again, as per instructions), and headed back down to get more work done. I went up another hour later and applied a final coat, as I only had just enough in the can for three coats.

I’m cautiously optimistic optimistic at this point since the entire seam is covered with a thickish layer of rubber. But I believe in overkill, so I’m going to check the home stores in Assiniboia the next time I’m in town to see if they carry this product so I can do another three coats.

If this repair doesn’t hold, I am pulling out all the stops and going up there with more Dicor, screws, and a piece of metal roofing! In fact, I have a piece of ridge cap the right length and width left. Now, wouldn’t that be a redneck solution?! But hopefully, this will work…

The roof dealt with, I came in to type some more, then did some work in the kitchen. I want to add a counter under the window on the driver’s side. I thought of doing that last year, but the money went elsewhere. I think it’ll happen this year.

So that’s all the excitement out of southern Saskatchewan today. Back to work I go since I still have about 1.5 hours left. I don’t even feel daunted by that since I expected to be glued to my computer today rather than having had the chance to knock off a few projects!